Shop

Model 260 colorimeter chroma 400-720nm

£895.00 (exc VAT) Each

Download Product Page PDF
SKU: CO/45104 Categories: , ,

Chroma Colorimeter model 260 Full programmability allowing up to 100 methods to be installed by the user. This permits semi automatic operation with the user only required to insert the prompted filter. An RS232 output allows the use of a serial printer and every result, blank and calibration is time stamped. The unit allows quick Absorbance and Transmission measurements with Auto-Zero, Concentration with Standard Solutions or Factor as well as the new Kinetic Reaction Rate and End Point methods.

 

Display : LCD Programmable

Wavelength Range : 400-750 nm

Wavelength Selection : Drop-in Filters

Bandpass : Gelatin 40 nm

Interference 6-10 nm (optional)

Modes : Absorbance, Transmission, Concentration, Factor ,Kinetic (Rate and End Point), (Sample and Reagent blank)

Methods : 100 programmable

Sample Numbering : Sequential and alpha- numeric 16 characters

Absorbance Range : 0.000 to 1.999

Absorbance Resolution : 0.001

Transmission Resolution : 0.001

Light Source : Pre-focused tungsten lamp

Detector : Silicon Photo diode

RS232 Output : Yes

Common specifications

Stability < ± 0.005A in any 15 min period

Photometric Reproducibility ± 1%T using same cuvette or test tube

Size and weight 218L x 230W x 188H mm 2.2Kg net

Power Requirements 90-264 VAC Auto-ranging or 12 V DC Battery

 

Accessories

Gelatin filters

These are low cost selection devices which produce or transmit a wide band of radiation usually ± 20 nm. Most colorimetric analyses have a wide absorption band which allows excellent results to be obtained in conjunction with the CHROMA colorimeters. Coverage of all wavelengths in the visible spectrum is catered for using a set of 8 Gelatin filters. Most colorimeters are used for only one type of analysis and will require the use of only one filter

Interference Filters

These are used to select wavelengths more accurately by providing a narrow bandpass typically of around 10nm. The interference filter also only absorbs approximately 10% of the incident radiation over the whole spectrum thereby allowing light of higher intensity to reach the detector.

Sample containers

Sample containers are offered in a variety of forms depending on whether the important factor is sample size