Shop

FLAME PHOTOMETER MODEL PFP7/C

£4,854.80 (exc VAT) Each

Download Product Page PDF
SKU: FP/25104 Categories: , ,

The Jenway clinical Model PFP7 is designed for routine determinations of sodium (Na), Potassium

(K) and Lithium (Li) supplied with 3 filters.

This equipment will only operate with the correct type of air compressor and gas regulator, as specified.

• Electronic flame failure detection

• Fine and coarse sensitivity controls

• Operates on Propane, Butane, Natural gas or L.P.G. supplies with suitable regulator

• Recorder output

• Economically priced

• Easily maintained

This equipment will only operate with the correct type of air compressor and gas regulator, as specified

 

Technical Specification:

Ranges: 120-160mmol/l Na (linearised)

               0-10.0mmol/l K

Limits of detection: Na ≤0.2ppm

                               K ≤0.2ppm

                               Li ≤0.25ppm

Reproducibility: 1% Coefficient of variation for 20 consecutive samples

                          using 10ppm Na set to read 50

Linearity: Better than 2% when concentration of 3ppm Na and K

                and 5ppm Li are set to read 100

Specificity: Interference from Na